Alba Signature

SRP (Including VAT): 8395 €

New Alba Signature is modernized version of our first Alba back in beginning of 2000s. Actually pretty much only thing combine old and new is similar idiom...and of course Penaudios plywood veneer design that has become Penaudios trademark all over the World. Design of the speaker have some excellent advantages over traditional design. The only walls that are opposite each other is side walls. This kind of structure does not wake internal standing waves neither flutter. Structure also is more rigid so overall better clarity in sound.

New cross-over, tweeter is Seas Excel 29mm textile dome tweeter, the one we are using thru our Signature-line. Midrange/woofer is also new 22cm (8 inch) OEM Seas Excel. By designing Alba Signature Penaudio concentrated to make our first loudspeaker that would be easily connected in any tube amplifier. It is relatively sensible and have really smooth impedance curve that won`t drop below 8 ohms at any time. Almost all the listening during design was done thru tubes.

Alba Signature is equipped with latest technology WBT Nextgen 0705Ag silver connectors.


Type
 2-way, reflex loaded, floorstander
Drive units
 29mm textile dome tweeter (Seas Excel, Crescendo), 220mm (Seas Excel) midrange/bass with heavy copper rings above and below pole piece
Cross-over
 3800Hz
Frequency range
in room response
25 – 30000 Hz
Sensitivity
 88 dB/1 m/2,83 V
Nominal impedance
 8 ohms
Recommended amplifier
>+20 W
Dimensions (WxHxD)
240 x 950 x 430 mm
Weight
22,1 kg (49 lbs)
Specialities
 Seas Excel drivers, WBT Nextgen 0705 AG, polypropylene capacitors, air core inductors, aluminium reflex pipes, Finnish Plywood 18 mm and Sandwich Veneer 1.5 mm + MDF 16mm + Plywood 5 mm (High Gloss Version MDF 25 mm and MDF 18 mm) cabinet
Copyright © 1988-2018 Penaudio. All rights reserved