Lumi Centre

SRP (Including VAT): 2690 €

Lumi Centre was designed to complement Snow Line series for home cinema package. Just like Talvi model it utilizes a same pair of Excel Specially for Penaudio woofers by SEAS with CURV woven cone, reinforced low loss rubber surround, copper ring and metal bullet and the 25 mm soft dome tweeter with SONOMEX surround. But the enclosure type and speaker configuration are different: drivers arranged according the D’Appolito scheme and the cabinet is sealed. This design helps to improve midrange resolution with fine clarity and focus while maintaining deep low end down to 36 Hz.

Using the identical drivers across the line is important for making the seamless imaging in surround sound setups. This fully applies to Snow series – any combination of speakers will work well in different home cinema configurations.

Classic Penaudio plywood style cabinet is extra rigid and virtually free of resonances. Internal reflections are carefully controlled with a smart combination of the damping materials. Other finishes include Oak and Black Ash. Front side can be covered with magnetic grill. And at the rear side you will find a pair of high quality WBT-0708 Cu Nextgen terminals.



Tech Specs

Type
2-way, sealed enclosure, stand mounted
Drive units
25 mm soft dome tweeter with Sonomex surround (Seas Excel), ferrofluid cooled, 2 x 145 mm CURV woven midrange/woofer (Seas)
Cross-over
5500 Hz
Frequency range in room response
36 – 25000Hz
Sensitivity
86 dB/1 m/2,83 V
Nominal impedance
8 Ohms
Recommended amplifier
>30 W
Dimensions (WxHxD)
435 x 165 x 200 mm
435 x 165 x 216 mm (with frame)
Weight
8,5 kg
Specialities
New woofer by SEAS for Penaudio, CURV woven cone, reinforced low loss rubber surround, copper ring and metal bullet, Excel motor system, SEAS Excel tweeter with SONOMEX surround, WBT Nextgen 0708CU connectors, Penaudio classic plywood style cabinet, hand wired crossover, magnet grill
Copyright © 1988-2019 Penaudio. All rights reserved